Quick guide

1. After connecting the pistol to a source of compressed air, open the front ring and select the nozzle according to the diameter of the pipe to be cleaned. Insert the nozzle into the slot.

2. Select the appropriate projectile according to the diameter of the tube and the type of cleaning you need to perform. Insert the projectile inside the nozzle and close the front ring.

3. Push the nozzle towards the end of the tube. Pull the trigger and hold it until the projectile comes off at the other end, where the projectile and removed impurities can be collected into a container.

An example of a cleaning performed on a steel tube in order to remove metal processing residues.

BEFORE                                                   AFTER

Privacy policy